top of page

i4507 RCI  Offshore Cranes

For Offshore cranes

i4507 RCI

For Offshore cranes

The i4507 (7” display) RCI on the lattice and fixed boom offshore cranes use a variety of sensors depending on what will work best on the specific model crane. The common sensors are dead-end load links, dynamometers, angles sensors, and ATB switch assemblies. All the sensors came in a marine duty version, usually stainless steel. I4507 systems are also available for cranes in hazardous gas areas or class 1 div 2 zones for the boom or cab. RCI systems on offshore platform cranes are critical to the safety and efficiency of the vessel and a required operator aid in most cases.

  • 7" full color display that is easy to read.

  • High resolution LCD screen readable in direct sunlight and with dimmable backlit at night, with accurate color images

  • Large integral memory 2GB (upgradable on request) and processor speed (600/800 MHz)

  • Flexibility to add inputs and outputs on the CANbus network

  • Intelligent computing for self-diagnostic detection of system malfunction

  • Uploading of new information via a USB Stick-No special tools or laptop required with all calibration done from the display screen

  • Display rating up to IP67 and suitable for an indoor or outdoor environment and a temperature range of

  • -20° C to 70°C (-4'F to 158'F). Optional extended temperature of-40° C to 85° C (-40'F to 185'F)

  • Supply voltage 11 to 36 vdc

  • Audible and visual alarms

  • Output connection for lock-out circuit for overload and ATB

  • Self - diagnostic mode with fault log

  • CPU and Display in one unit

 

bottom of page